Mitsubishi Electric MELSEC SW1DNC-CCIEF-B User Manual page 34

Cc-link ie field network interface board
Table of Contents

Advertisement

Instructions for personal computer
■PCI standard
When a personal computer which is not compliant with the PCI or PCI Express standard is used, troubles caused by failures
such as a contact failure or operation error may occur. This board may not operate when a PCI Express slot for graphics is
used.
For details of the number of boards that can be installed, installation slots, and occupied slots, refer to the following section.
Page 36 Performance Specifications
Instructions for operating system
■Supported version of SW1DNC-CCIEF-B
Operating system
Windows Server 2019, Windows Server 2016, Windows 10 (IoT Enterprise 2016 LTSB)
Windows 10 (Home, Pro, Enterprise, Education)
Windows 8.1, Windows Server 2012 R2
Windows 8, Windows Server 2012
Windows 7 (64-bit version), Windows Server 2008 R2
Windows 7 (32-bit version)
Windows Server 2008 (64-bit version)
Windows Server 2008 (32-bit version)
Windows Vista
Windows Server 2003 R2 (64-bit version)
Windows Server 2003 R2 (32-bit version)
Windows XP
■User authority
Log on as a user with administrator authority.
• Installation and uninstallation are available only by the administrator's authority.
• The Usage of utilities is available only by the administrator's authority.
■Secure Boot function
For the following operating system, disable UEFI (BIOS) Secure Boot function or use SW1DNC-CCIEF-B Version 1.13P or
later.
• Windows 10 Version 1607 (Build number '14393' or higher)
*1 It is not included when upgrading from Windows 10 Version 1511 or others by using Windows 10 Anniversary Update.
For the method for checking the version of an operating system and the status of Secure Boot, refer to technical bulletin FA-A-
0235.
■.NET Framework 3.5
When using one of the following operating system, the .NET Framework 3.5 is required.
• Windows Server 2019
• Windows Server 2016
• Windows 10
• Windows 8.1
• Windows Server 2012 R2
• Windows 8
• Windows Server 2012
Enable the .NET Framework 3.5 (including .NET 2.0 or 3.0) in "Turn Windows features on or off" on the control panel.
2 SYSTEM CONFIGURATION
32
2.4 Operating Environment
Supported version
Q80BD-J71GF11-T2
1.16S or later
1.10L or later
1.06G or later
1.05F or later
1.05F to 1.09K
*1
Q81BD-J71GF11-T2
1.16S or later
1.10L or later
1.06G or later
1.04E or later
1.02C or later
All versions
1.02C to 1.09K
1.09K or earlier
1.02C to 1.09K
1.09K or earlier

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Melsec q80bd-j71gf11-t2Melsec q81bd-j71gf11-t2

Table of Contents