Mitsubishi Electric MELSEC SW1DNC-CCIEF-B User Manual page 130

Displayed items
No. Item
(1) Operating status
(2) Mode
(3) MAC address
(4) IP Address
(5) LED
(6) Error buttons
(7) [Station No. Setting] button
■Specifying station number
Specify a station number for the station number unspecified station when the connected station is a master station.
Window
[Diagnostics]  [CC IE Field Diagnostics]  "CC IE Field Diagnostics" screen  [Station No. Setting] button
Operating procedure
1.
Set the items on the screen.
Item
MAC Address of select station
Station No. for setting
2.
Click the [OK] button.
• Adding a station set in "Network Configuration Setting"
The external device on a slave station outputs data input from the master station, simultaneously with
configuration of the station number setting. Therefore, set the CPU module to STOP or check that outputs
from the external device will not cause a problem beforehand.
• A station number is not specified to the slave station
For a method for canceling the station number set to the slave station in the CC-Link IE Field Network
Diagnostics, refer to the manual of slave station being used.
13 DIAGNOSING BOARD STATUS
128
13.2 Diagnosing CC-Link IE Field Network
Description
Display the station number and operating status.
Display the mode. It is not displayed if a station number is not specified.
Display the MAC address.
Displays an IP address (only when it is set).
Display LED status and communication status of PORT1 and PORT2.
Display the icon when the target station is disconnected.
An error button is displayed when an error occurs on the CC-Link IE Field Network board or connection
cable.
The "Error details" screen is displayed by clicking the button.
This button is displayed when a station number is not specified for the selected station.
The "Station number setting" screen for changing the station number is displayed by clicking the button.
Description
Display the MAC address of the selected station.
Set the station number.
Setting range: 1 to 120, numerals (0 to 9) in 3 digits only
: Normal
: Error (Data link is continued.) (yellow)
: Error (Data link is stopped.) (red)
: Station number is not specified. (red)