Link Start/Stop - Mitsubishi Electric MELSEC SW1DNC-CCIEF-B User Manual

Cc-link ie field network interface board
Table of Contents

Advertisement

Link start/stop

Start/stop the data link of a specified station. Use this function for debugging purposes to stop the station from receiving data
from other stations and sending its own data.
Window
[Diagnostics]  [CC IE Field Diagnostics]  "CC IE Field Diagnostics" screen  [Link Start/Stop] button
Operating procedure
1.
Set the items on the screen.
Item
Network Information
Link Start/Stop Setting Contents
[Select All] button
[Cancel All Selections] button
2.
Click the [Execute] button.
The link start/stop is executed for all selected stations at once.
When the process is completed, "Selected Status" are cleared and the contents of "Link Status" are updated.
Connected Station Information
All Stations Information
Link Start/Stop Executing Contents
Description
Display the network information of the connected station.
Display the link status of all stations on the same network which are
performing the data link with the connected station. Target stations of the link
start/stop operation can be selected in "Selected Status".
Select "Link Start"/"Link Stop".
To forcibly start the data link of a station which has been stopped by another
station or a special relay/special register, check "Forced Link Start".
Selects all stations displayed in the list.
Cancels the selection status of all stations selected in the list.
13 DIAGNOSING BOARD STATUS
13.2 Diagnosing CC-Link IE Field Network
13
131

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Melsec q80bd-j71gf11-t2Melsec q81bd-j71gf11-t2

Table of Contents