Mitsubishi Electric MELSEC SW1DNC-CCIEF-B User Manual page 111

Target relay network
For a relay station set in the routing parameter, set a relay station of the own network which is routed by the transient
transmission.
Ex.
A setting to perform transient transmission to network number ●
To go to network No. , station No.
No routing parameter setting is required for
network No. because the module of
network No. is mounted on the relay station.
Network No.
*1 The stations, which routing parameter settings are not supported such as head modules, do not need to be set. The communication with
other networks is made depending on the routing parameters set to the master station.
• Transient transmission range
Communications can be made with stations on up to the eighth network (the number of relay stations: 7).
• To check whether routing parameters have been correctly set and transient transmission will be
successfully performed, perform a communication test in CC-Link IE Field Network diagnostics. (Page
56 Communication test)
• On a relay station in the multiple CPU system, when different control CPUs are set for the network modules
Set the same routing parameters to all the control CPUs.
Set the same routing parameters.
of its own network No. .
Station that needs
*1
routing parameters
(Relay station)
Network No.
Control CPU setting
10 SETTING PARAMETERS
10.2 Setting Network Parameter
10
109