Click the [Update] button to update the network configuration diagram as follows:
• When a serial number (first five digits) of the master station is "17022" or higher, and if the network
configuration diagram on the diagnostic screen does not match with the actual network configuration, match
it by updating the network configuration diagram. Whether mismatch is occurred or not can be checked
using 'Network configuration mismatch occurrence status' (SB0098). (Page 27 When a serial number
(first five digits) of the master station is '17022' or higher)
• When a serial number (first five digits) of the master station is "17021" or lower, delete the disconnected
station displayed on the network configuration diagram. The disconnected station is displayed on
"Disconnected station status monitor".
Disconnected station status monitor
Displays a disconnected station that has been set in the network configuration settings but has not yet performed data link.
However, even if a disconnected station has performed data link, it is displayed in this area in the following cases.
• A station that was reconnected to a network after cable disconnection/insertion or power-OFF and power-ON of the system
and remains disconnected
• A station that was disconnected with the station icon deleted in the network map display area by clicking the [Update]
button
Disconnected station
status monitor
The
icon indicates a station that has not yet performed data link.
Icons other than
indicate stations that had performed data link before disconnection.
Selected station communication status monitor
Display status of the selected station.
Window
(1)
(3)
(5)
Click the button to display
the "Error details" screen.
(2)
(4)
(6)
13.2 Diagnosing CC-Link IE Field Network
13 DIAGNOSING BOARD STATUS
13
127