When Installation Is Aborted Or Failed; Uninstallation; Uninstallation Procedure; When Uninstallation Is Completed Normally - Mitsubishi Electric MELSEC SW1DNC-CCIEF-B User Manual

When installation is aborted or failed

When the installation is aborted or failed, take corrective actions following the troubleshooting.
Page 144 Installation failed
6.3

Uninstallation

This section explains a procedure for uninstalling the software package.

Uninstallation procedure

1.
Uninstall the software package from the control panel of Windows.
• If a screen confirming the deletion of common files appears at uninstallation
Select "No to All". If deleting common files, other applications may not operate normally.
• If a screen confirming the execution of restart appears at the completion of uninstallation
Select "Yes, I want to restart my computer now.", and restart the personal computer.
• MELSECPowerManager may not be uninstalled depending on the installation state which affects the other
installed software packages.
For details of MELSECPowerManager, refer to the following section.
Page 231 MELSECPowerManager

When uninstallation is completed normally

When the uninstallation is completed normally, the icons registered in the Windows Start are deleted.

When uninstallation is failed

When the uninstallation is failed, take corrective actions following the troubleshooting.
Page 144 Uninstallation failed
6 INSTALLING AND UNINSTALLING SOFTWARE PACKAGES
82
6.3 Uninstallation