Connector - Mitsubishi Electric MELSEC SW1DNC-CCIEF-B User Manual

When the RUN LED is flashing
An error which is peculiar to boards has occurred.
Name Status
RUN Flashing
ERR. ON
RD ON
When checking channel number
The status is displayed as shown below according to the current channel number while opening the "Channel No. Setting"
screen. (Page 112 Setting Board Channel Numbers).
<181>

Connector

The PORT1 and PORT2 connector for CC-Link IE Field Network.
RJ45 connector
L ER LED
LINK LED
RJ45 connector
Connect an Ethernet cable. (Page 52 Ethernet cable connection)
Connector part LED
Display the link status and reception status of the CC-Link IE Field Network board.
Name Status
L ER ON
OFF
LINK ON
OFF
Description
One of the following error has occurred. (Check ERR.LED, and RD LED.)
PCI bus/PCI Express bus error has occurred.
Driver WDT error has occurred.
<182> <183>
Description
• The module received abnormal data.
• The board is performing loopback.
• The module received normal data.
• The board does not perform loopback.
Linkup in progress.
Linkdown in progress.
<184>
4 PROCEDURE BEFORE OPERATION
4.2 Part Names
4
43