Progressive Inspection — Event 10 - BELL HELICOPTER 430 Maintenance Manual

5-25. PROGRESSIVE INSPECTION — EVENT 10
DATA REFERENCE
Paragraph 5-13
Chapter 96
Chapter 95
Chapter 26
SCHEDULED INSPECTIONS
INSPECTION TASK DESCRIPTION
DATE: __________________W.O. ______________________
FACILITY: _________________ _ _________________________
HELICOPTER S/N: __________ _ _________________________
REGISTRY NO.: ____________ _ _________________________
TOTAL TIME:________________________________________
SIGNATURE:_______________ _ _________________________
GENERAL:
1. Do a complete 50 hour inspection.
DETAIL:
1. Remove the access
compartment. Examine the condition of the electrical and
avionics components and make sure they are correctly attached.
Examine the electrical harnesses and cables for frayed wires
and loose or broken clamps and fasteners. (F4)
2. Remove the battery. Examine the vent lines for blockage or
damage. Clean the battery area before you install a serviceable
battery. (F4)
Examine inspection window(s) and sight glass(es) for
cracking and discoloration. If either of these
conditions are present the part must be removed and
replaced prior to returning helicopter for service.
3. Examine the left and right engine fire bottles. Make sure
they show the correct pressure. (F3/F4)
panel from the aft electrical
NOTE
26 JAN 2007 Rev. 15
BHT-430-MM-2
INITIAL
MECH OTHER
5-00-00
Page 67