Main Rotor Yoke — 2500-Hour Inspection - BELL HELICOPTER 430 Maintenance Manual

BHT-430-MM-2
4-00-00
Page 14 Rev. 19 1 NOV 2012
Refer to BHT-430-CR&O (Chapter 62) for
inspection and damage criteria.
1. Remove main rotor yoke.
2. Clean main rotor yoke.
3. Perform a detail visual inspection of the entire
yoke for evidence of cracking, delamination
and damage. Specific attention should be
applied to the shaded areas.
Figure 4-4. Main Rotor Yoke — 2500-Hour Inspection
TC APPROVED
ECCN EAR99