Progressive Inspection - Event 12 - BELL HELICOPTER 430 Maintenance Manual

BHT-430-MM-2
5-27. PROGRESSIVE INSPECTION — EVENT 12 (CONT)
DATA REFERENCE
Chapter 25 and
Chapter 52
Chapter 52
Chapter 25
Chapter 25
Chapter 25
Chapter 25
Chapter 25
Chapter 26
Chapter 11 and
BHT-430-FM-1
5-00-00
Page 76 Rev. 15 26 JAN 2007
SCHEDULED INSPECTIONS
INSPECTION TASK DESCRIPTION
5. Remove the interior trim around the emergency exit
windows in the passenger doors. Examine the emergency exit
windows as follows: (F3/F4)
a. Examine the bond between the window retainer and the
door frame. Replace the retainer if it is not correctly bonded to
the frame at all points except at the two lower corners.
b. Examine the inboard and outboard side of all of the
rubber retainers. Replace the retainers if you find any nicks or
cracks.
c. Make sure the filler strips are firmly seated in the
retainer grooves.
d. Install the interior trim.
6. Examine the seat cushions and seat backs for tears and
deterioration. Make sure they are correctly attached. (F1/F2/F3/
F4)
7. Examine the seat assemblies to make sure they are
correctly attached to airframe structure. (F1/F2/F3/F4)
8. Examine the crew seat attenuation indicators. (F1/F2)
9. Examine the safety belts and shoulder harnesses for
deterioration. Make sure they are correctly attached to the
airframe structure. (F1/F2/F3/F4)
10. Examine the cabin fire extinguisher for damage or
corrosion. Examine the operation of the quick opening clamp.
Make sure the fire extinguisher is fully charged. (F1/F2)
11. Examine the placards and instrument panel decals. Make
sure they are clear and legible. (F1/F2)
12. Examine the contents of the first aid kit. Replace any
damaged or time expired items. Replace any items with
deteriorated packaging. (F2)
INITIAL
MECH OTHER