BELL HELICOPTER 430 Maintenance Manual page 81

5-21. PROGRESSIVE INSPECTION — EVENT 6 (CONT)
DATA REFERENCE
Chapter 63
Chapter 79 and
BHT-430-CR&O-V.2
Chapter 71
Chapter 71
Chapter 76
Chapter 63
Chapter 79 and
BHT-430-CR&O-V.2
Rolls-Royce
250-C40B Operation
and Maintenance
Manual, Publication
CSP 21000
ECCN EAR99
SCHEDULED INSPECTIONS
INSPECTION TASK DESCRIPTION
16. Examine the left oil cooler blower driveshaft and couplings
for damage. Make sure they are correctly attached. Examine
the discs for cracks that radiate from the bolt holes, corrosion,
wrinkles or other signs of overstress. (E1)
17. Examine the left oil cooler blower for blockage, cleanliness
and damage. Make sure it is correctly attached. (E1)
18. Examine the right power plant area for fuel or oil leaks.
Examine the flexible and rigid fuel and oil lines for wear, chafing
and damage. Make sure they are correctly attached. (E2)
19. Examine the right engine mounts and accessories for
damage. Make sure they are correctly attached. (E2)
20. Examine the right engine power lever, fuel control box
assembly and control cable for looseness and correct range of
motion. Make sure they are correctly attached. (E2)
21. Examine the right oil cooler blower driveshaft and
couplings for damage. Make sure they are correctly attached.
Examine the discs for cracks that radiate from the bolt holes,
corrosion, wrinkles or other signs of overstress. (E2)
22. Examine the right oil cooler blower for blockage,
cleanliness and damage. Make sure it is correctly attached. (E2)
23. Start the helicopter (BHT-430-FM-1) and do a FADEC
manual mode check.
MECH OTHER
1 SEP 2009 Rev. 17
BHT-430-MM-2
INITIAL
5-00-00
Page 51/52