Every 300 Hours Of Component Operation - BELL HELICOPTER 430 Maintenance Manual

5-29.

EVERY 300 HOURS OF COMPONENT OPERATION

DATA REFERENCE
Chapter 62
BHT-ALL-SPM
BHT-430-CR&O-2
BHT-430-CR&O-2
BHT-430-CR&O-2
SCHEDULED INSPECTIONS
INSPECTION TASK DESCRIPTION
DATE: __________________W.O. _____________________
FACILITY: _________________ _ ________________________
HELICOPTER S/N: __________ _ ________________________
REGISTRY NO.: ____________ _ ________________________
TOTAL TIME:_______________________________________
SIGNATURE:_______________ _ ________________________
SWASHPLATE CONTROLS
1. Examine the swashplate assembly and rotating controls as
follows: (R1)
a. Remove the pitch change links and disconnect the drive
link from the rotating ring.
b. Examine the upper pitch link universal bearings for axial
play. Replace the bearing if it is more than the permitted limits.
c. Examine the lower pitch link rod end for axial and radial
play. Replace the bearing if one is more than the permitted
limits.
d. Examine the spherical drive bearing in the swashplate
rotating ring for axial and radial play. Replace the bearing if one
is more than the permitted limits.
e. Examine the drive hub idler link and drive link for
cracked or loose bushings. Replace cracked or loose bushings
as necessary.
BHT-430-MM-2
INITIAL
MECH OTHER
26 JAN 2007 Rev. 15
5-00-00
Page 81