BELL HELICOPTER 430 Maintenance Manual page 57

5-16. PROGRESSIVE INSPECTION — EVENT 1
DATA REFERENCE
Paragraph 5-13
Chapter 96
Chapter 96
Chapter 26
SCHEDULED INSPECTIONS
INSPECTION TASK DESCRIPTION
DATE: __________________W.O. _____________________
FACILITY: _________________ _ ________________________
HELICOPTER S/N: __________ _ ________________________
REGISTRY NO.: ____________ _ ________________________
TOTAL TIME:_______________________________________
SIGNATURE:_______________ _ ________________________
GENERAL:
1. Do a complete 50 hour inspection.
DETAIL:
1. Remove the access panel from the aft electrical
compartment. Examine the condition of the electrical and
avionics components and make sure they are correctly
attached. Examine the electrical harnesses and cables for
frayed wires and loose or broken clamps and fasteners. (F4)
2. Remove the battery. Examine the vent lines for blockage or
damage. Clean the battery area before you install a serviceable
battery. (F4)
Examine inspection window(s) and sight glass(es)
for cracking and discoloration. If either of these
conditions are present the part must be removed and
replaced prior to returning helicopter for service.
3. Examine the left and right engine fire bottles. Make sure
they show the correct pressure. (F3/F4)
NOTE
26 JAN 2007 Rev. 15
BHT-430-MM-2
INITIAL
MECH OTHER
5-00-00
Page 27