5-36.
EVERY 2 CALENDAR YEARS
DATA REFERENCE
Chapter 5 and
Chapter 62
SCHEDULED INSPECTIONS
INSPECTION TASK DESCRIPTION
DATE: __________________W.O. _____________________
FACILITY: _________________ _ ________________________
HELICOPTER S/N: __________ _ ________________________
REGISTRY NO.: ____________ _ ________________________
TOTAL TIME:_______________________________________
SIGNATURE:_______________ _ ________________________
SWASHPLATE AND CONTROLS
Examine the control bolts more frequently if you
operate the helicopter in adverse environmental
conditions.
1.
Inspect the flight control bolts. (R1)
a. Remove the bolts that follow:
(1) Remove four bolts from the main rotor pitch link
universal bearing upper.
(2) Remove four bolts from the main rotor pitch link
universal bearing lower.
(3) Remove four bolts from the main rotor pitch link
lower.
(4) Remove two bolts from the drive hub assembly.
(5) Remove one bolt from the drive hub to idler link.
(6) Remove one bolt from the idler link to drive link.
(7) Remove one bolt from the drive link to rotating
ring.
NOTE
26 JAN 2007 Rev. 15
BHT-430-MM-2
INITIAL
MECH OTHER
5-00-00
Page 95