After Every Main Rotor Blade Removal - BELL HELICOPTER 430 Maintenance Manual

5-40.

AFTER EVERY MAIN ROTOR BLADE REMOVAL

DATA REFERENCE
Chapter 4
BHT-430-CR&O-2
SPECIAL INSPECTIONS
INSPECTION TASK DESCRIPTION
DATE: __________________W.O. _____________________
FACILITY: _________________ _ ________________________
HELICOPTER S/N: __________ _ ________________________
REGISTRY NO.: ____________ _ ________________________
TOTAL TIME:_______________________________________
SIGNATURE:_______________ _ ________________________
This is an airworthiness inspection limitation.
MAIN ROTOR YOKES
1. With the main rotor blades removed examine the main
rotor yokes as follows: (R1)
a. Clean the yokes.
b. Do a careful visual inspection of the yokes for cracks,
delamination and impact damage.
c. If any defect is found, refer to BHT-430-CR&O-2
(Chapter 62) for damage criteria.
NOTE
26 JAN 2007 Rev. 15
BHT-430-MM-2
INITIAL
MECH OTHER
5-00-00
Page 105/106