BELL HELICOPTER 430 Maintenance Manual page 42

BHT-430-MM-2
5-13. 50 HOUR INSPECTION (CONT)
DATA REFERENCE
Chapter 62
Chapter 62
Chapter 62
Chapter 62
5-00-00
Page 12 Rev. 16 9 JAN 2008
SCHEDULED INSPECTIONS
INSPECTION TASK DESCRIPTION
16. Examine the main rotor adapter assemblies for evidence of
contact between the adapter pads and the yoke assembly. (R1)
17. If evidence of contact is found in
the steps that follow: (R1)
a. Remove the main rotor blades and examine damage.
b. Examine the
delamination.
c. Examine the adapters and upper stop assemblies for
damage and deformations.
d. Examine the lead lag dampers for delamination and
general condition.
e. Prior to main rotor blade installation, remove contact
evidence from up-stop end plug and replace adapter lead lag
pads as required.
step 15 and
yoke assembly for
INITIAL
MECH OTHER
step 16, do
cracks and