Progressive Inspection — Event 6 - BELL HELICOPTER 430 Maintenance Manual

5-21. PROGRESSIVE INSPECTION — EVENT 6
DATA REFERENCE
Paragraph 5-13
Chapter 96
Chapter 52
Chapter 95
Chapter 52
Chapter 25
Chapter 25
SCHEDULED INSPECTIONS
INSPECTION TASK DESCRIPTION
DATE: __________________W.O. _____________________
FACILITY: _________________ _ ________________________
HELICOPTER S/N: __________ _ ________________________
REGISTRY NO.: ____________ _ ________________________
TOTAL TIME:_______________________________________
SIGNATURE:_______________ _ ________________________
GENERAL:
1. Do a complete 50 hour inspection.
DETAIL:
1. Examine the condition of the electrical and avionics
components in the nose compartment. Make sure they are
correctly installed. Examine the electrical harnesses and cables
for frayed wires and loose or broken clamps and fasteners.
2. Examine the nose compartment door for damage. Make
sure it latches correctly. (F1/F2)
3. Examine the pitot tubes. Make sure they are correctly
attached. (F1/F2)
4. Examine the crew doors, passenger doors and baggage
compartment doors for damage or corrosion. Examine the
positive locking mechanisms. Examine the door seals for tears
or separations. Make sure the doors are correctly attached to
the airframe structure. (F1/F2/F3/F4)
5. Examine the seat cushions and seat backs for tears and
deterioration. Make sure they are correctly attached. (F1/F2/F3/
F4)
6. Examine the seat assemblies to make sure they are
correctly attached to airframe structure. (F1/F2/F3/F4)
BHT-430-MM-2
INITIAL
MECH OTHER
26 JAN 2007 Rev. 15
5-00-00
Page 49