Progressive Inspection — Event 5 - BELL HELICOPTER 430 Maintenance Manual

5-20. PROGRESSIVE INSPECTION — EVENT 5
DATA REFERENCE
Paragraph 5-13
Chapter 63
Chapter 63 and
BHT-430-CR&O-2
Chapter 63
SCHEDULED INSPECTIONS
INSPECTION TASK DESCRIPTION
DATE: __________________W.O. _____________________
FACILITY: _________________ _ ________________________
HELICOPTER S/N: __________ _ ________________________
REGISTRY NO.: ____________ _ ________________________
TOTAL TIME:_______________________________________
SIGNATURE:_______________ _ ________________________
GENERAL:
1. Do a complete 50 hour inspection.
DETAIL:
Examine inspection window(s) and sight glass(es)
for cracking and discoloration. If either of these
conditions are present the part must be removed and
replaced prior to returning helicopter for service.
1. Examine the left and right pylon fluid mounts for corrosion,
damage and correct fluid level. Make sure they are correctly
attached. (F5/F6)
2. Examine the upper and lower lift link rod end bearings for
serviceability. (F5/F6)
Examine inspection window(s) and sight glass(es)
for cracking and discoloration. If either of these
conditions are present the part must be removed and
replaced prior to returning helicopter for service.
3. Examine the transmission for correct fluid level and leaks.
(F5/F6)
NOTE
NOTE
26 JAN 2007 Rev. 15
BHT-430-MM-2
INITIAL
MECH OTHER
5-00-00
Page 45