10 / Getting started with Norstar
Starting and ending a session
As system coordinator the first steps in making any change to the
Norstar system are always the same.
It's the same as pressing
ÅΘȈ
is the password, unless the password has been changed.
Programming Record
Check the
Ending a session
The system goes ahead with any changes you make to programming
as soon as you move away from a setting, either by using the
navigation buttons or
You can see if the changes you have made to telephone programming
have taken effect by pressing UPDATE display key. The display will show
you how many telephones have not been updated yet.
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
Press
Press
••¤flfl‹››
¤‹fl›fl
Press
(
Press
it is entered wrong.
The display shows the first of the seven
headings available for administration
programming.
for the most recent password.
Press
After a few seconds, the time and date
will reappear on the display.
®
.
ƒ
.
••Ç؈ÏÈÌ
.
ÅΘȈ
).
to re-enter the password if
RETRY
®
to end the session.
P0857846 Issue 02