Adding Or Removing Members From A Group - Nortel ICS 7.1 Coordinator Manual

Adding or removing members from a
group
A DN for a telephone can be associated as a member of a Hunt
Group, and is called a member DN.
Members of the group can be any Norstar or Business Series
Terminal telephone, ISDN terminal, or portables. A telephone
can be in more than one Hunt Group but is considered a
member in each Hunt Group, increasing the total number of
members in the system.
There can be only one appearance of the Hunt Group on a
telephone, no matter how many lines are assigned to the group.
Hunt Group DNs cannot be members of other Hunt Groups.
Consult your customer service representative to determine
your Hunt Group number range.
1. Place the appropriate programming overlay on your
programming set.
2. Press
display shows
3. Press
4. The display shows
5. Press
6. Press
7. Press
8. Enter the Hunt Group number you want to program (1-30)
or press
N0130946 01

Adding or removing members from a group / 167

.
(ADMIN). The display shows
.
until the display shows
.
. The display shows
. The display shows
to scroll through the groups.
(CONFIG). The
.
.
Modular ICS 7.1 System Coordinator Guide
.