Table of Contents
Advertisement
SENDLOG.CMD OS/2 Utility
Syntax
RDEVMAP [c:\path\DEVMAP.lvm] [ D=d ] n ]
[ D=d:\old\ n:\new\ ]
Optional Parameters
devmap
D=d n
If the DEVMAP location is not specified, the current DEVMAP (as kept by
AWSPROF) is used. If a DEVMAP is specified, that DEVMAP is modified and made
the current DEVMAP. The old DEVMAP file is saved as:
c:\path\devmap.2VM
Used during installation to globally change the drive letter of all DASD devices and
DMKRIO.ASM, USER.DIR, and DEVMAP.1VM in DEVMAP.
Used to change only drive letter d to drive letter
n
every time it occurs. Use this form
if you have, for example, added a hard disk and need to change all the
subdirectories on a given drive.
D=d:\old\ n:\new\
If two paths are specified, a selective replacement occurs:
d:\old
n:\new
the drive and path to be searched for and changed.
the drive and path that replaces d: \01 d\
SENDLOG.CMD OS/2 Utility
Use the SENDLOG.CMD utility to collect and transmit logs and traces to IBM via the Internet for problem
analysis.
Syntax
SENDLOG (ICON)
Optional Parameters
ICON
This parameter is used for the "Send Maintenance Logs to IBM
II
icon in the
P/390
folder to cause the utility to pause when completed so the messages can be read.
248
Service Guide
Advertisement
Table of Contents
