Table of Contents
Advertisement
- - - - - - - - - -_ _ _ _ _ _ _
·1~~_~;~';~~
SSA RAID Adapter, SSA, and RAID
82
Service Guide
3. Correct your configuration by reconfiguring the SSA cables or by
removing
the
excess
devices
or adapters from the loop.
4. Turn on the system.
If the SRN occurred because additional
devices
or adapters were added to a
working SSA loop:
1. Remove
the additional
devices
or adapters that are causing the problem, and
put the loop back into its original, working configuration.
Note: It is important that you do these actions, because they enable the
configuration code to reset itself from the effects of the error.
2. Review
the configuration that you are trying to make, and determine why that
configuration is not
valid.
3. Correct your configuration by reconfiguring the SSA cables or by
removing
the
excess
devices
or adapters from the loop.
(j
Advertisement
Table of Contents
