Table of Contents
Advertisement
SSA RAID Adapter, SSA, and RAID
2
Find the configurator function you
want in the list at the right, then
go to the step indicated.
3
Converting a New Disk Drive to
a Free Resource
• From the Main menu, select
SSA Adapter List.
• Select the SSA Adapter from
the list.
• From the SSA Adapter menu
select New Resources.
• A list of new disk drives
displays. For each disk drive
that you want to attach to
your system, put the cursor
against its name and press
Delete. Its name disappears
from the list. That disk drive
is now in the free state.
Note: If no list displays,
Return to the Main menu by
pressing Esc.
• If you want to display a list of
disk drives that are in the
free state, Select Free
Resources from the Main
menu. A list of disk drives
that are in the free state is
displayed.
End of procedure
130
Service Guide
• Convert a new drive to a free resource - go to step 3.
• Create an array or hot spare - go to step 4.
• View a resource OR delete a drive from an array OR add a drive
to an array - go to step 13.
• Attach a resource - go to step 18.
• Delete a resource - go to step 20.
• Modify the attributes of a resource - go to step 21.
• List or delete records of old arrays in the NVRAM -
go to step 22.
A new disk drive is one that has not been used previously by the
same type of system as that in which it is now installed. Before a
new disk can be attached to the system, it must be in the free state.
ISSACFG SSA Configurator and Service Aids
Vyyrrmdd
OS2 Version
Main Menu
I
I
Li st of New Di sks
SSA UID/ Array Name
Status
Adapter
xxx xxx xx
xxxxxxx
11
yyyyyyyy
yyyyyyy
11
I
<ESCAPE> Exit
<ENTER> Select <DELETE> Delete
<Fl> Help
<F9> Fl ash On
<flO> Flash Off
Q
Advertisement
Table of Contents
