Table of Contents
Advertisement
9
• Start the SSA Configurator and Service Aids
Utility (see step 1 of "Running the SSA
Configurator" on page 129).
• From the Main menu, select SSA Adapter
List.
• Select the adapter from the SSA Adapter List.
• Select Rejected Resources.
Are any disk drives listed?
NO
YES
~
Go to step 38.
10
Ask the user to delete and recreate the array that
is in the Offline state. If this does not correct the
problem, call for assistance.
End of procedure
11
Go to "Running the SSA Configurator" on
page 129 and follow the procedure to delete
records of old (dormant) arrays from NVRAM.
SSA RAID Adapter, SSA, and RAID
An attempt has been made to create a new array,
but the adapter already has the maximum number
of arrays defined.
Chapter 7. The SSA RAID Adapter, SSA, and RAID
93
Advertisement
Table of Contents
