Select The Access Mode; Operation On A Bri Or U-Interface Access; Te-Simulation Mode - Intec Argus 3u plus Manual

8 Select the Access Mode

8.1 Operation on a BRI or U-Interface access

8.1.1 TE-Simulation mode

TE automatic
On a BRI or U-interface access, the ARGUS will
automatically determined the D-channel Layer 2 mode
(PP or P-MP). If the ARGUS determines that the access
supports both modes, the following Configuration menu
will open:
TE P-P or TE P-MP
Afterwards, the access and the protocol stack will be
initialized in accordance with the selected setting.
The ARGUS will then jump to the Main menu.
ARGUS 3u plus/3u NT
8 Select the Access Mode
The Access Mode menu is
not selectable from the Main
menu.
It opens automatically once
the physical access
selected in the Access menu.
Using the < >, select L2
↓
mode
.
Confirm the selected L2
mode
The ARGUS will return
to the
Main menu.
is
31