L1 Status; The L1 Status Of A Bri Access - Intec Argus 3u plus Manual

14 L1 status

14 L1 status

14.1 The L1 status of a BRI access

The ARGUS displays in TE mode the current status of Layer
1: which signal is received from the remote end (Rx) and
which signal does the ARGUS send (Tx).
112
Use the < > to select L1
↓
status.
The ARGUS displays the
status of Layer 1 or of the
signal, which is currently
being sent ( Info 0 .... Info 4).
Press <NEW> to setup Layer
1 again (if necessary).
ARGUS 3u plus/3u NT