Intec Argus 3u plus Manual page 53

so no charges will be incurred.
There are PBXs that use separate call numbers for
incoming and outgoing calls.
In this case, for the Service checks, you can enter
a "remote" call number that corresponds to the
"own" number that is not stored in the ARGUS.
If the Service check should extend outside of the
local exchange, it is possible to perform the
Service check in an end-to-end mode.
In this case, you must enter the remote call number for a
second terminal device.
The ARGUS will then automatically check whether the
remote terminal can accept the call under the various
services – in other words, whether it is "compatible" with
these services.
In the test results, the second part (second +, - or *) refers to
the answer from the remote exchange.
ARGUS 3u plus/3u NT
9 Single Tests
In the Single tests menu,
to select > Service
↓
< use
test.
Enter the
Own number of the access
under test
55