Intec Argus 3u plus Manual page 83

Procedure for an Outgoing Call (ISDN)
1) Overlap sending:
In overlap sending, the digits of the call number are sent
individually.
-Key
Disconnect
ARGUS 3u plus/3u NT
10 Connection
In the Single tests menu,
use the < > to select
↓
Phone / connec.
Use the < > to select
↓
Overlap sending. If the
-Key is pressed the
ARGUS will open the
Connection menu.
Using the < > select the
↓
service that should be
used for the connection.
Using the keypad, enter
the B-channel (by default,
the last B-channel used
will be suggested)
When entering a new B-
channel, first
<DEL>.
If you enter an *, the
ARGUS will choose any
B-channel that is free.
The ARGUS will show
whether the B-channel is
available.
Setup the connection
Enter the number
on the keypad.
The ARGUS displays the
service (e.g. Tel.), the
own number (90700), the
B-channel (B02) and the
number called (01191).
The -Key is used to
↓
scroll though
information.
<TM >: to start the Test
Manager (Page 94).
press
the
85