Table of Contents
Advertisement
15 Configuration
Call
Acceptance
Voice coding
DTMF / Keypad
Destination
MSN
CUG Index
118
If the ARGUS is set to "only own MSN/
DDI" and is in TE mode on a P-MP
access, it will only signal those calls
which placed to the MSN (on a P-P
access the DDI) of the access under
test.
If set to "all MSN/DDI", the ARGUS
signals all calls.
Prerequisite:
- the "own" number must be entered in
the call number memory under "own
number" (see "Saving Call Numbers"
on page 129)
- the incoming call must have a
destination MSN
The default setting is "all MSN/DDI".
This setting will be saved permanently.
There are two options for coding voice
data in a B-channel:
- A-law (default)
- µ-law
This parameter will be reset to the
default setting when the ARGUS is
switched off and back on again.
DTMF or keypad setting
A destination number can be entered,
which the ARGUS will use for MSN
interrogation (default: 0043).
Entry of the CUG index, which the
ARGUS should use when testing the
CUG (Closed User Group) service.
Default: 148
ARGUS 3u plus/3u NT
Advertisement
Table of Contents
