Table of Contents
Advertisement
15 Configuration
DTMF interval
Reset to
FLASH time
124
Setting the interval between two DTMF
characters:
The duration of the signal can take a
value between 40ms and 1s (default:
80ms).
Raise or lower the value, using the
Keys:
In the range 40 - 200ms:
increments
In the range 200 - 300ms:
increments
In the range 300 - 1000ms:
100ms increments
When the upper limit is reached
(1000ms), the softkey <
automatically change to a <
vice versa when the lower limit (40ms)
is reached.
Restores the default settings: Level =
0 dB, Time = 80 ms
Interval = 80 ms
Sets the length of a FLASH.
This setting is needed in order to use
special features of a PBX.
The FLASH time can take a value
between 40ms and 1s.
The value can be raised or lowered
using the
-Keys:
↑
↓
,
In the range 40 - 200ms:
increments
In the range 200 - 300ms
increments
In the range 300 - 1000ms:
100ms increments
When the upper limit is reached
(1000ms), the softkey <
automatically change to a <
vice versa when the lower limit (40ms)
is reached.
ARGUS 3u plus/3u NT
-
↑
↓
,
in
10ms
in
20ms
in
> will
↑
> and
↓
in
10ms
in
20ms
in
> will
↑
> and
↓
Advertisement
Table of Contents
