Testing Features With The Keypad - Intec Argus 3u plus Manual

17 Testing Features with the Keypad

This feature is only relevant for a BRI access!
Some network operators do not support the standard DSS1
features, rather they expect the user to control the network
via so-called keypad command sequences.
In these cases, the desired facility is usually activated by
entering a series of characters and then sending these
characters within a DSS1-specific protocol element. These
so-called Keypad-Elements are imbedded in a SETUP
message.
An outgoing call containing a keypad message is placed
from the ARGUS by pressing the
To distinguish the call from a normal call, the first character
sent is the '#'. Each step is acknowledged either acoustically
(handset) or via special protocol elements (cause). These
causes are displayed by the ARGUS.
To simplify the use of these functions, you can use the
ARGUS's speed-dialing memory.
An example for an application:
Speed-dial number 0
Speed-dial number 1
Speed-dial number 2
Speed-dial number 3
Speed-dial number 4
Speed-dial number 5
Speed-dial number 6
Speed-dial number 7
Speed-dial number 8
Speed-dial number 9
ARGUS 3u plus/3u NT
17 Testing Features with the Keypad
-Key.
4711 own number of the
access under test
124527 tel. no. of own company
#*67# Code for activating CFB
##67# Code for deactivating
CFB
#*#67# Code for querying CFB
(interrogation)
#*#21# Code for querying CFU
(interrogation)
#*#61# Code
CFNR(interrogation)
free
free
free
for querying
135