Suppl. Services Tests - Error Messages - Intec Argus 3u plus Manual

9.1.3 Suppl. Services Tests – Error messages
In the example, the error belongs to the error class "wrong
or invalid number".
In the table below, you will find that this is an error from the
network and that it reports that the call number was
incomplete or in the wrong call number format (see
"CAUSE-Messages – DSS1 Protocol" on page 140.).
Distributing the error codes into error classes:
Error Description
class
A No or another
access
B Wrong or invalid
number
C
One or more
B-channels busy
D
Wrong service
For further information regarding error codes:"ARGUS Error
Messages" on page 144, "CAUSE-Messages – DSS1
Protocol" on page 140 and "CAUSE-Messages – 1TR6
Protocol" on page 142.
ARGUS 3u plus/3u NT
9 Single Tests
If an error occurs during the
Supplementary
Tests or if it is not possible to
setup a call, the ARGUS will
display the corresponding
error code (e.g. 28).
Use < > to scroll through.
↓
Cause (from
network)
1 TR6 DSS1
__ __
53, 56 1,2,3,18,21
22,28,88
10,33,59 17,34,47
3 49,57,58,63
65,70,79
Services
Cause
ARGUS
internal
201,204,205,
210,220
152,161,162,
199
___
___
53