Table of Contents
Advertisement
Settings on the ARGUS:
Display on
ARGUS
Menu language
LCD contrast
Baud rate
Alarm bell
Feed
ARGUS 3u plus/3u NT
Comment
Selection of the menu language
Setting the display contrast
(The contrast can be changed in 16
steps).
The contrast can be increased or
decreased using the
The display shows a vertical arrow,
which shows the current setting on a
scale from low to high contrast.
Sets the maximum Baud rate to be
used by the ARGUS to communicate
with a PC.
The ARGUS signals with an alarm in a
variety of situations, e.g. when a bit
error occurs in a BERT. When this
parameter is set to "off", all audible
alarms are suppressed.
In the "only
normal" setting, the
ARGUS will automatically draw its
power from one of the following
sources (in this order):
power
supply,
BRI
accumulators.
On some accesses, powering the
ARGUS from the BRI line may lead to
trouble. Therefore, you can switch off
the option for feed from the BRI
network.
(setting: "no line power")
15 Configuration
-Keys:
↑
↓
,
network
or
127
Advertisement
Table of Contents
