Configuration: X.31 - Intec Argus 3u plus Manual

15.5 Configuration: X.31

The operation is the same for all configurations and will be
illustrated with a single example:
Display on
ARGUS
TEI
LCN
ARGUS 3u plus/3u NT
In the Main menu, use the <
>
↓
Select Configuration.
Use the <
Use the <
TEI.
Enter the TEI on the keypad.
>: The ARGUS will
<
return to the X.31 menu
without changing the TEI.
Change TEI
Comment
Entry (from the keypad) of the TEIs to
be used in the X.31 test. If you enter
**, the ARGUS will automatically
select a TEI in the X.31 test.
Entry (from the keypad) of the LCN to
be used in the X.31 test.
15 Configuration
> to select X.31.
↓
> to select e.g.
↓
125