Table of Contents
Advertisement
8.1.4 Recorder
In the Recorder mode, the ARGUS passively monitors the
connected BRI access.
The ARGUS records all D-channel signals from the remote
end and the signals that it sent to the NT itself, without
influencing the access or Layer 1.
Unlike in the BRI pass. trace mode, the recorded D-channel
signals will be saved in the ARGUS's internal Flash memory
and not sent to a PC.
The storage is organized as a ring buffer, i.e. as soon as the
Flash memory is full, the ARGUS will automatically overwrite
the oldest data.
Quitting
the
active
recording function. The
ARGUS is then in the
"Recorder" mode.
ARGUS 3u plus/3u NT
8 Select the Access Mode
With
the
↓
<
>,
Recorder
Start the Recorder function.
The
ARGUS
is
Recorder mode (recording is
not yet active!) and will check
the levels on the NT side of
the BRI access.
Level ( << to low, >> to high,
OK, __ No level).
Recording started
(The Trace LED flashes)
The
display
shows
number of signals received
and
the
duration
recording
hours:mínutes:seconds.
Using <LISTEN>, switch the
speech
path
onto
channel. First the B-channel
select dialog will open. After
selecting a B-channel, it will
be possible to listen to the
voice data (in the direction
Network ----> User) on this
channel.
select
now
in
the
of
the
in
a
B-
39
Advertisement
Table of Contents
