Setting The Ethernet Interface And Access Mode - Intec ARGUS GigaBit Ethernet Manual

2 Operation on an Ethernet access

2.2 Setting the Ethernet interface and access mode

Use the included patch cable to connect the ARGUS as a PC replacement to the modem, a
ONT, a hub, a switch or a PC and then switch the ARGUS on. The initial display will depend
on the access setting used last (in the examples ADSL and Ethernet):
10
The access menu:
Using
The ARGUS will set the type of
access to Ethernet. The access
menu will open.
The Access mode:
Using
The ARGUS will use the marked
access mode (in this example, IP
based). The ARGUS opens the
Ethernet access types.
Continuation on next page, fig. 2
Select a type of access;
the selected type will be
marked in blue (in the
example, Ethernet).
Select a type of access;
the selected type will be
marked in blue (in the
example, IP based).
ARGUS