Automatic Test - Intec Argus 3u plus Manual

12 Automatic Test

The ARGUS performs an automatic test series and displays
the test results.
Using the intec software, WINplus or WINanalyse, the test
results can also be saved on a PC, where they can be
presented in a comprehensive measurement report and
printed.
The ARGUS automatically performs the following sequence
of tests:
On a BRI or U interface access (ARGUS in TE mode)
- Status
- Level Measuring
- Service Tests
- BERT in an extended call to oneself
- Test the Supplementary Services
- CF Interrogation (Call Diversions)
- MSN Interrogation
- X.31 test
On a BRI or U-interface permanent circuit
- Status
- Level Measuring
- BERT in end-to-end mode (e.g. with a loopbox on the
remote end)
The ARGUS saves the test results together with the date
and time (supplied by the exchange). Additionally, settings
such as your own plus a remote call number will also be
saved.
The test results are not lost when the ARGUS is
switched off.
The ARGUS saves the results of multiple test series
(records 1,2,3...).
Each function in the Automatic test menu refers to one of the
test series saved as a record.
Therefore, the first step will open a dialog in which you must
select the desired data record.
ARGUS 3u plus/3u NT
12 Automatic Test
99