Table of Contents
Advertisement
9.1.2 Suppl.service interrogation in DSS1
+ = suppl. service supported
- = suppl. service not supported
Use the <
> to scroll through the test results.
↓
If you press the <
ARGUS 3u plus/3u NT
In the Single tests menu,
using the <
Supp.serv.test.
Use the keypad to enter the
"Own number" or select if
from
the
memory (the number of the
access
under
"Saving Call Numbers" on
page 129.). The ARGUS will
test the availability of the
supplementary service (in
part by placing a call to
itself).
Using the <
↓
service which should be
used for the supplementary
services test.
Confirm the service.
Enter the B-channel on the
keypad.
By
channel last used will be
suggested. If you enter an *,
the ARGUS will choose any
B-channel that is free.
Confirm the B-channel
Use the <
> to select the
↓
supplementary service (e.g.
TP)
that
you
ARGUS to check whether it
is supported on the access
under test.
Start test
The ARGUS will display the
results of the test once it is
done:
> , the ARGUS will return to the
9 Single Tests
>, select
↓
speed-dialing
test)
(see
> , select the
default,
the
want
the
49
Advertisement
Table of Contents
