Bert Wait - Intec Argus 3u plus Manual

9 Single Tests

9.3.2 BERT wait

In BERT wait mode, the ARGUS will wait for the BERT at
the remote end which is necessary for an end-to-end test:
Operating
mode
BERT wait
The ARGUS displays that will appear are the same as those
in Chapter 9.3.1 Start BERT .
66
In the Single tests menu,
use the < > to select Bit
↓
error test.
Open the Bit error test
menu.
Using the < >, select
↓
BERT wait.
Activate "BERT wait"
The ARGUS first waits for a
call and then sets up the
connection.
During the connection, the
received bit pattern will be
evaluated and another bit
pattern will be sent.
If you press <MENU>, the
ARGUS will return to the
Main menu; the test "BERT
wait" remains active. In the
Main menu, if < TM
pressed, the ARGUS will
return to the display "BERT,
Wait active", see Page 98.
>: Calls the Test
< TM
Manager (Page 94)
ARGUS 3u plus/3u NT
> is