Saving Call Numbers - Intec Argus 3u plus Manual

15.7 Saving Call Numbers

Ten call numbers with a maximum of 24-places can be
entered in the speed-dialing memory.
The first speed-dial number must be the own call
number of the access under test (this is especially
important for the automatic Service test).
In the Remote No.1-8 memory locations, you can
save remote call numbers. In the memory location X.31 test
number , the ARGUS expects the entry of the X.25 access
number for the X.31 test (see Chap. 9.4 page 68).
When entering an own call number with an extension
(operation of the ARGUS on a PBX access), observe the
following:
The extension is separated from the access number by a #.
For outgoing calls, the ARGUS uses the entire call number
(without #) as the number called (CDPN or DAD) and, for the
calling number (DSS1-CGPN or 1TR6-OAD), only the
number after the #, in other words the extension. A "#" at the
ARGUS 3u plus/3u NT
15 Configuration
In the Main menu, use the <
>
↓
Select Configuration.
Use the < > to select
↓
Numbers.
Enter the number of the
access under test on the
keypad.
Press < DEL > to delete the
digit before the cursor.
Using the < >-Key scroll
↓
through the speed-dialing
memory.
Save the call number.
129