Connection Setup Time - Intec Argus 3u plus Manual

9 Single Tests

9.9.1 Connection setup time

The ARGUS places an outgoing call and measures the time
between sending the SETUP and receiving the ALERT or
CONN. The ARGUS disconnects automatically as soon as
the measurement is completed.
seconds and the received L3 messages (end of connection
setup).
If the ARGUS cannot perform the measurement (e.g.
because the call number entered was wrong or no B-
channel was free) the corresponding cause will be
displayed.
78
In the Single tests menu, use
the < > to select Time
↓
measuring.
Use the < > to select
↓
Conn.setup time.
Enter - or select from the
speed-dialing memory - the
call number for the outgoing
call
Use the < > to select the
↓
service.
Enter the B-channel on the
keypad.
Perform measurement
The ARGUS will display the
connection setup
ARGUS 3u plus/3u NT
time in