Table of Contents
Advertisement
9 Single Tests
9.4.2 Manual X.31 Test
In this test variant, the ARGUS first requests a TEI, LCN and
an X.31 number (The ARGUS uses the TEI and LCN values
stored in the Configuration/X.31 as default values - seePage
125) and the call number saved as the X.31 number in the
speed-dialing memory (see Page 129). If a " ** " is entered
for the TEI, the ARGUS will automatically determine a TEI.
Using the first TEI with which X.31 is possible, the ARGUS
will begin to setup a connection.
70
In the Single tests menu,
> to select the X.31
↓
< use
test
.
With the <
>, select
↓
Manual.
The ARGUS displays the
stored TEI.
You can edit the TEI from
the keypad; If you enter ** ,
the
ARGUS
automatically determine a
TEI.
< DEL >: Delete the TEI
The ARGUS displays the
stored LCN.
It is possible to edit the LCN
from the keypad.
Display of X.31 Number
(see speed-dialing memory
Page 129). It can be edited
from the keypad.
Setup a X.31 connection
The ARGUS will display the
LCN, TEI and X.31 number
(e.g. 0263110 00091258).If
you
select
predefined data packets will
be sent.
ARGUS 3u plus/3u NT
will
<DATA>,
Advertisement
Table of Contents
