Setting The Type Of Access - Intec Argus 3u plus Manual

7 Setting the type of access

7 Setting the type of access
In the Access menu, the user must select the type of
physical access to which the ARGUS is actually connected.
If Automatic is selected, a fully-automatic sequence will be
started: The ARGUS will automatically determine the type of
interface (BRI, U interface or POTS) and set the access to
TE-mode.
Status display
displays: If you press the <
to the previous display.
26
If you press the <RESTART>
softkey, the B-channel test
will be repeated.
Open the Main menu
Using the < > select the
↓
Access menu
The Access menu will open
Using the < > select the type
↓
of access
(e.g. BRI access)
Confirm the access
The Access Mode menu will
open automatically.
The following applies for all
> , the ARGUS will return
ARGUS 3u plus/3u NT