Intec Argus 3u plus Manual page 86

10 Connection
2) Enblock
In en-bloc signalling, the ARGUS sends the entire dialing
information in one block.
The number is dialed from the call number memory (see
"Saving Call Numbers" on page 129.).
-Key
88
In the Single tests menu,
use the < > to select
↓
Phone / connec.
Use the < > to select
↓
Enblock signalling.
Use the -Key to select
the number from the call
number memory
reenter the number on the
keypad.
Press <DEL> to delete a
digit.
If the -Key is pressed
the ARGUS
will open the Connection
menu.
Using the < > select the
↓
service that should be
used for the connection.
Enter the B-channel on
the keypad.
(See Overlap sending for
entries)
Start the dialing
procedure
(for more displays and
information see Overlap
sending)
Disconnect
The ARGUS displays the
cause of the disconnect.
(see page 90 Clearing
down an
connection)
ARGUS 3u plus/3u NT
or
ISDN