Ftp Operation (Gprs Or Umts) - Honeywell EK280 Applications Manual

EK280
− Press the "Transfer changes to
The EK280 is now available via the modem for the duration set.
− In enSuite press the "Disconnect" or
interface communication link between enSuite and the EK280.
b) Test call up through a GSM modem connection
− Set up the modem communication link between enSuite and EK280.
( chapter 3.2 Setting up the communication link to EK280 via a
− Once the communication link is set up, you can carry out checks, for instance view certain
parameters. To do this press "Navigation" on the left-hand side of the enSuite window and then
"Parameterize online" in the bottom of the navigation window, then click on the plus sign next to
"Parameters" and then its subsections.
− In enSuite press the "Disconnect" symbol or
c) Test call up through the TCP/IP network (incl. GPRS and/or UMTS network)
− Set up the network communication link between enSuite and the EK280.
( chapter 3.3 Setting up the communication link to EK280 via a network
− Once the communication link is set up, you can carry out checks, for instance view certain
parameters. To do this press "Navigation" on the left-hand side of the enSuite window and then
"Parameterize online" in the bottom of the navigation window, then click on the plus sign next to
"Parameters" and then its subsections.
− In enSuite press the "Disconnect" symbol or

7.1.6 FTP operation (GPRS or UMTS)

7.1.6.1 FTP operation, depending on the version of EK280
From the EK280-version 2.50, the FTP data transfer is controlled by the EK280 itself. This differs from
previous versions, where for handling the "FTP Pushes", the modem application "ComFTP" is needed.
i
From V2.50 onwards, no special "ComFTP" modem is required for the FTP data transmission
with EK280. Rather, it can be done with the GPRS and UMTS modems listed in  chapter 7.1.1.
As of version V2.50 of the EK280 firmware, the ComFTP modems are no longer supported!
The FTP data transmission via GPRS and/or UMTS with an EK280 as of V2.50 is described in the  chapter
7.1.6.2.
i
The modem application "ComFTP" is required for FTP data transmission with an EK280 up to
and including V2.40. "ComFTP" is software in a modem that reads data cyclically from the
EK280, processes it and transfers it via "FTP Push" to a pre-specified FTP server.
The operation of an EK280 (up to and including V2.40) with a ComFTP modem is described in  chapter
7.1.6.3.
Application Manual
device" icon at the top of the enSuite window.
"Disconnect from all
"Disconnect from all
"Disconnect from all
devices" icon to terminate the optical
modem, p. 19)
devices" to end the test retrieval.
(TCP/IP), p. 20)
devices" to end the test retrieval.
68