Honeywell EK280 Applications Manual page 133

EK280
i
The access data stated in the table are examples. They may differ depending on the SIM or SIM
tariff. Please keep in touch with your provider!
After configuring the GPRS and/or UMTS operation, the following FTP-specific steps still have to be carried
out:
1. Create the FTP servers on which the data can be stored ("phone book").
2. Parameterize the data stored on the server ("FTP transmission").
3. Parameterize the time at which this FTP task is to be executed, as well as the server on which these data
are to be stored ("Connection").
These steps are described in separate FTP manual  [10].
For informations, contact
i
From the EK280-V2.50, a modem used for FTP data transmission can be used for FTP and CSD
connections  chapter 7.4.5) as well as for TCP connections  chapter 7.4.6). However, there
should only be one connection at a time.
7.4.7.3 FTP data transfer via GPRS with ComFTP (EK280 up to V2.40)
For an active ComFTP application, data is read from the EK280 by the modem and transferred
independently using the PUSH principle from the ComFTP modem to a FTP server set up beforehand. The
commissioning of this function must be carried out separately in the modem itself (separate descriptions
available,  "Operating instructions modem application ComFTP", ID no. 73019546).
In addition to the FTP function, the standard GSM/CSD mode (PULL principle) is also possible by calling a
data telephone number (albeit not at the same time).
i
The active ComFTP application will incur costs due to continuous data volume transmission via
a mobile network. Estimate adequate reserve for this. Talk to your provider to obtain an
economical tariff. Switching off roaming can also help to reduce costs. Optimization of these
factors is your responsibility.
i
Wireless networks can be disrupted, therefore one hundred percent data transfer cannot be
guaranteed in any case.
i
This application works only with an FE260 with "ComFTP" option. This option
must be requested when ordering the FE260.
FE260 compatibility is indicated by the field marked "ComFTP" on the FE260
modem's label.
i
As this application is very complex, it is essential that you carry out the activities in the exact
order described to obtain the desired result.
Application Manual
ElsterSupport@Honeywell.com.
131