Honeywell EK280 Applications Manual page 137

EK280
"ST3" configuration interface
with cable attached
Parameterizing interface
− Fit the jumper "Mode" on the FE260 modem board in the position "program" (lower position,
 illustrations).
− For serial data transmission, insert the cable connection into the parameterizing interface of the
modem board ( Fig. 12) and the COM or USB port of the PC or laptop.
− Turn on the FE260 power supply.
CAUTION! 230 V alternating voltage! Risk to life!
Application Manual
Fig. 12: Modem assembly with ECM-GW120
with "Mode" jumper and push-fitted parameterizing cable.
Fig. 13: Modem assembly with Integra M2106, "Mode" jumper
and parameterization interface.
Jumper "Mode" in "program"
position
"Mode" jumper
135