Changing The Measurement Period; Values Relating To Measurement Periods - Honeywell EK280 Applications Manual

EK280
i
The measurement period archive is a ring-type memory. If the archive is full then the oldest
entries are overwritten.

9.1.3 Changing the measurement period

All values relating to measurement periods can be created with the measurement period which can be set
here.
− In order to set the measurement period on the device to another value, open the administrator or
calibration lock as described in the  EK280 Operating Instructions [1].
i
If at least two entries are still free in the calibration manual then it is possible to change the
measurement periods when the administrator lock is open. Otherwise the value can only be
changed when the calibration lock is open.
− Move the cursor in the register
− Press the ENTER key. ⇒ One digit of the value flashes.
− Move the cursor with the arrow keys  or  to the digits and change these with the arrow keys 
or .
i
The measuring period is set to "60 minutes" as standard.
Sensible and typical values include 5, 10, 15, 20, 30 or 60 minutes.
− Press the ENTER key to confirm the set value. It is possible to abort the entry by pressing the ESC
key.

9.1.4 Values relating to measurement periods

− To display the volumes relating to the measurement periods, move the cursor to the
"Volume" > "per measuring period".
Display
VbMPc ∆ Vb Interval meter progress of the current month
VbMP ∆ Vb Interval meter progress of the previous month
VbMPc↑ Maximum VbMP of current month
VbMP↑ Maximum VbMP of last month
VmMPc ∆ Vm Interval meter progress of the current month
VmMP ∆ Vm Interval meter progress of the previous month
VmMPc↑ Maximum VmMP of current month
VmMP↑ Maximum VmMP of last month
Application Manual
"Serv." to "Archives" > "MPer".
Description
193
"Serv." >