Inserting The Sim Card Into The Fe260 - Honeywell EK280 Applications Manual

EK280
FTP Yes
TSC Yes

7.4.3 Inserting the SIM card into the FE260

The SIM card must only be inserted and if applicable unlocked in FE260 GSM/GPRS/UMTS versions. For
other versions (Analog modem, Ethernet, ISDN) this chapter can be skipped.
SIM card installation varies according to the GSM/GPRS/UMTS module used in the FE260:
− ECM-GW120, ECM-2G-UG350, ECM-3G-UU270
( chapter 7.4.3.1 Inserting the SIM card into the modems "ECM-GW120", "ECM-2G-UG350" and
"ECM-3G-UU270", p. 116).
− Older versions: Integra "M2106+" or "M2106B"
( chapter 7.4.3.2Inserting the SIM card into the modem "Integra-M2106+" and
p. 117)
How to recognize the individual radio modems can be found in  chapter
controlled modems and their application in the FE260
7.4.3.1 Inserting the SIM card into the modems "ECM-GW120", "ECM-2G-UG350" and "ECM-3G-
UU270"
Danger!
Ensure the mains voltage is disconnected before opening the FE260 housing, ensure it
is not turned back on and verify that there is no voltage.
− Remove the four screws from the top of the FE260 and open it.
− To unlock the SIM card holder slide the metal
strap to the right and open flap.
− Slide SIM into the flap of the SIM card holder.
−
−
−
 Metal strap to the right:
 Metal strap to the left:
−
22 With the modem application ComFTP
With the modem application ComTSC
23
Application Manual
Yes
22 22
Yes
23 23
After installation, the chamfered edge of the
SIM is located at bottom left.
SIM unlocked (open)
SIM locked (closed)
Yes No
22
Yes No
23
7.4.2 Differentiation of the radio-
(p. 115).
Fig. 10: SIM card slot on the ECM-GW120 modem
116
No
No
"Integra-M2106B",