Advertisement

Quick Links

INNCOM B578 Datasheet
Overview
INNCOM's multifunctional controller works in three configurations to facilitate different
Integrated Room Automation System (IRAS) operations:
 As the B578S Edge Router, it networks Ethernet to INNCOM's Deep Mesh RF
network. It provides backhaul networks with up to 200* rooms per PAN ID. It
supports multiple IP protocols (UDP, ICMP). The expanded addressing facilitates
transport reliability and multicasting. The Edge Router enhances security and
offers RF-to-Ethernet protocol conversion, with the availability of a PoE power supply for Power over Ethernet
applications.
 As the B578N, the Edge Router interfaces with the Tridium Niagara JACE (Java Application Control Engine)
controller to provide connectivity to numerous common network protocols such as LonWorks and BACNet, as
well as proprietary networks.
 As the PC-803, the device acts as a protocol converter, converting in-room RF traffic to Ethernet towards the
server.
Note: The device will generally be referred to as the "B578" throughout this
document. Statements specific to a particular configuration will be noted
accordingly.
Features
 Supports CBL32 control algorithms
 RS485 System Interface dongle
 10MBit Ethernet
 Available in PoE and +12VDC powered models
 128 bit AES encryption (Ethernet link and RF network)
 Typical indoor RF range up to 100ft
 Supports 2.4Ghz IEEE 802.15.4 compliant RF transceiver
 Supports S5bus (through external adapter)
 Compact physical dimension
 DIN rail mounting option (Figure 1)
 Wall or ceiling mount on standard 2-gang ring (Figure 2)
 Supports up to 200 rooms depending on the guestroom application deployed and the selected RF environment
at the site.
 4 kBytes mailbox memory usable as a relay-buffer for battery operated devices (Edge Router)
 IPv6 support (Edge Router)
*
The 200 device limit is based on timing considerations used by the communication protocols of a Deep Mesh network. Local RF interference
sources, conditions, and device placement can decrease this number.
Copyright 2014 INNCOM by Honeywell
1
Figure 1 B578 DIN
Figure 2 B578 Wall/Ceiling Mountable

Advertisement

Table of Contents
loading

Summary of Contents for Honeywell INNCOM B578

  • Page 1  IPv6 support (Edge Router) The 200 device limit is based on timing considerations used by the communication protocols of a Deep Mesh network. Local RF interference sources, conditions, and device placement can decrease this number. Copyright 2014 INNCOM by Honeywell...
  • Page 2: Specifications

    Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by INNCOM International Inc. could void the user’s authority to operate the equipment. Copyright 2014 INNCOM by Honeywell...
  • Page 3: Mounting Considerations

    DIN rail first. This ensures that the cable, cable channels, and connections are always aligned in the correct orientation in a daisy-chained application. Please note that the above picture is from the INNCOM QC lab. In field deployment, B578s will typically be distributed throughout the building. Copyright 2014 INNCOM by Honeywell...
  • Page 4 DC jack  plug in Ethernet connection  snap the top housing back onto the unit The Edge Router design mounts externally on a wall or ceiling or even on furnishings, if need be. Copyright 2014 INNCOM by Honeywell...
  • Page 5: Input/Output Connections

    The B578 can be powered directly with an external +12VDC power suppl y using the DC jack (J1). Typically, the INNCOM 204-005 power supply and 262-301 100-120VAC power cable are provided for the B578 in this power configuration. Copyright 2014 INNCOM by Honeywell...
  • Page 6: Fcc Statement

    Example: 201-104-P12-B578N-A0: B578 with a +12VDC power supply configured as a Deep Mesh RF Edge Router and Tridium Niagara Interface, in a DIN rail housing configuration. Example: 201-104-P12-PC-803S-A0: PC-803 with a +12VDC power supply configured as a PC-803 room Copyright 2014 INNCOM by Honeywell...
  • Page 7 Deep Mesh RF Edge Router B578N Deep Mesh RF Edge Router with Niagara Interface Housing Configuration Option This character set defines the software configuration of B57x. B57x Din Rail Housings A0 B57x Surface Mount Housings B0 Copyright 2014 INNCOM by Honeywell...
  • Page 8 OP/N Code Logic Board Type Part Number See “Individual Components” chapter DIN Rail Mounted Housings See “Individual Components” chapter Surface Mounted Housings Copyright 2014 INNCOM by Honeywell...
  • Page 9: Base Models

    Base Models The base model is used as the baseline configuration from which to build the variant configuration options and models. Name Description 201-104-P00-B578S-B0 Base Model in a surface mount configuration. Individual Components Below are a set of components such as housings, PCBA’s and harnesses which can be ordered or added for final configuration.

Table of Contents